ZKTeco SF300 Price in Bangladesh
ZKTeco SF300 is an IP based fingerprint terminal, which operate in both network mode and standalone mode. it can connect with ZKAccess3.5 software for access control and time attendance management. Wiegand output makes SF300 flexible to connect with ZKTeco or any 3rd party controllers as a slave reader, Additionally, wiegand input allows two units of SF300 to configure with each other and utilize Master & Slave solution, which requires user verification at both entrance and exit. Meanwhile, anti-passback function can be used to maximize the security. Auxiliary input interface allows SF300 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.
Special Features:
- 2.8-inch touch screen, color display with graphical UI for easy operation
- Up to 24 user-defined schedules that can be activated on a daily bell alert (optional)
- Prompt audio acceptance or rejection signals for valid or invalid fingers
- Compact and lightweight, small size for 86mm (L) x 86mm (H) socket installation
- TCP/IP or RS485 communication for various networking environments
- Supports USB flash drive for offline data management
- Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
- Up to 15 multi-verification methods to enhance security level
- Standard access control features such as Time zone, Holiday, A&C Group, Unlock combination etc.
- Duress Alarm offers effective protection against duress by threats
- Tamper proof switch and multiple alarm outputs
- Multi-languages customizable
Advantages of ZKTeco SF300
- Improved security.
- Faster access.
- Higher accuracy.
- Greater convenience.
- Helpful for calculating overtime
- Calculate lateness
- Cost-effective
Consider before buying ZKTeco SF300 Acess control & Time attendance Terminal
Before buying the ZKTeco SF300 Access control and Time Attendance Terminal device, you need to consider some queries. These are: How many employees do you have? What type of basic timesheet or detailed data do you prefer? How much spending capacity do you have, if any at all? Do you want online or on-site support for your attendance data if multiple sites are in use? In addition, You have to consider:
- Accuracy - To avoid any mistakes or discrepancies, it's important to have a time clock that is as accurate as possible. The device should be able to punch in and out at the correct times. This is one of the most important reasons why you are buying this machine!
- Integration - Your time attendance device should work with other software from different vendors and integrate seamlessly for maximum efficiency. The universality of your machine can make it last longer too!
Digi-Mark Solution authorized distributor of ZKTeco access control in Bangladesh. You can buy the ZKTeco SF300 Acess control and Time Attendance Machine at the best and dealer price from Our Head Office (Dhaka, Motijheel), IDB branch, Multiplan branch, Uttara Branch, Chittagong (chattagram) showrooms. We have dedicated Technical engineers to assist all over Bangladesh. Total set-up and after-sale support can be ensured at the best price. To know more details please Contact Us at our Facebook Page or 01979-234344.
FAQ on the Biometrics attendance system.
1. Which is the recommended finger to be used for a fingerprint scanner?
You can use any of the ten fingers for verification. The index and thumb are much easier for the scanner to capture rather than other fingers.
2. Does this fingerprint device secure?
It is highly secure for you, and it enhances your privacy by providing encryption and biometrics functionality. In this technology, fingerprints cannot be duplicated, lent, or stolen.
3. Can fingerprint images be duplicated?
No. The fingerprint image is not stored; it uses the algorithm concept before the mathematical data is stored as uniquely yours. The fingerprint obtained from other sources will not be recognized as a life finger is needed for verification.